 |
|
|---|---|
|
Resolution/Speed Chart (fps)
|
|
|
800 x 600
|
6,688
|
|
640 x 480
|
10,101
|
|
320 x 240
|
33,057
|
|
512 x 128
|
40,000
|
|
256 x 128
|
63,492
|
| 256 x 64 | 100,000 |
|
128 x 128
|
88,888
|
|
128 x 64
|
129,032
|
Using a proprietary sensor design and existing Phantom v7.3 camera electronics, the Phantom ir300 provides extended spectral response beyond visible light into the infrared spectrum. The extended IR response allows you to image events not previously visible to CMOS-based digital high-speed cameras.
While most CMOS sensors start losing sensitivity rapidly above 600nm, the Phantom ir300 extends that point to 800nm giving it a usable range to about 1100nm.
The ir300 is not a thermal imaging camera.
|
Phantom ir300 Features
|
|
|---|---|
| Maximum Resolution | 800 x 600 |
| Number of Pixels | 480,000 |
| Max. Frame Rate (fps) at Max. Resolution | 6,688 |
| Maximum Frame Rate (fps) | 190,476 @ 32 x 32 |
| Pixel Bit Depth | 8-, 10-, 12-, 14-bit selectable |
| Pixel Size | 22 microns |
| Active Sensor Dimensions (W x H) | 17.6mm x 13.2mm |
| Sensor ISO (12232) | 4800 ISO monochrome in the visible spectrum |
| Minimum Exposure Time | 2µs |
| Shutter Type | Electronic Global |
| Mechanical Shutter for Auto/Remote CSR | An external mechanical shutter is available as an option |
| Ethernet Connectivity | Gb Ethernet control |
| Triggering | Fully adjustable within recordable frames software or hardware trigger (TTL) |
| Range Data | Yes |
| SAM-3 (Signal Acquisition Module – 3) | Yes |
| Strobe Sync | Yes |
| Sync Imaging / Frame Clocking | Yes, Internal, External, IRIG-B, IRIG-B w/Phase Shift |
| Ready Out Signal | Yes |
| High-Speed (DRAM) Memory | 8GB or 16GB models available |
| Non-volatile Memory | TBD |
| Lensing | Nikon f-mount standard, PL, C-, and Canon EOS available Optional Canon EOS lens mount for remote lens control |
| Power Supply | Power: 24VDC with AC adapter included |
| DC Power / Battery | Yes; External +24VDC |
| Hi-G | No |
| Preview, Focusing and Playback | SVGA Computer Monitor, Continuous Video Out, RCU accessory |
| Video Out | NTSC, PAL, HD-SDI |
| Pre/Post-Trigger Recording | Yes |
| CAR – Continuous Adjustable Resolution | Yes, in 32 x 8 increments |
| Frame Rate Profile | Yes |
| EDR – Extreme Dynamic Range | Yes |
| Selective Auto Exposure | Yes |
| Continuous Recording | Automated continuous recording for remote, unmanned operation |
| Multi-Cine | Yes, up to 16 memory segments |
| Cine Conversion | Yes, to Cine, Cine Compressed, Cine RAW, AVI, Multipage TIFF, MXF PAL, MXF NTSC, QuickTime, Windows BMP, OS/2 BMP, PCS, TGA, TIFF, LEAD, JPEG, JTIF, DNG, DP |
| Image Timestamp | Yes |
| Continuous Data Steaming | No |
| PIV – Particle Image Velocimetry | Shutter off mode |
| Memory Gate | Yes |
| Event Marking | Yes |
| Image Processing | Yes |
| Variable Speed Playback | Yes |
| Secondary IP Address | Yes |
| Software | Phantom Camera Control, Phantom Video Player, Phantom Cine Panel, Phantom Explorer. |
| Size (W x H x D) | 10.9cm x 10.16cm x 24.13cm (4.3in x 4.0in x 9.5in) |
| Weight | 3.175kg. (7lbs.) |
| Mounting | 1/4-20 inch and four 10-32 mounting holes base and top |
| Active Cooling | Yes |
| Temperature | 0°C to 40°C operating temperature |
| Humidity | 80% non-condensing humidity |
| Firmware Upload | Yes |
| SDK – System Developers Kit | Yes |
|
|||||||||||
