Phantom Camera Products

Phantom v341

  • 4 megapixel image
  • 3 gigapixel/second throughput
  • 10-800 frames-per-second (fps) at full resolution
  • 1 µs minimum exposure
  • CineMag compatible
  • Range ready


Phantom v341

The Phantom v341 digital high-speed video camera provides a 4 megapixel 35mm format sensor and almost 3 gigapixels/second throughput. That means full-resolution frame rates of 800 frames-per-second (fps). Shutter speeds down to 1 microsecond and a global electronic shutter allow for crisp, sharp images with little or no image blur or motion artifacts.

Take the wide view with our custom-designed 2560 x 1600 pixel CMOS sensor. The aspect ratio of the Phantom v341 allows you to keep moving targets in-frame longer and see more of the event you are recording.

This "range ready" camera has dual power inputs to protect your data in case of power failure (via battery backup), timecode in/out (IRIG or SMPTE), Range Data input, and sports a new reflective color for better temperature stability when used outdoors. Add convenience features like an Internal Mechanical Shutter, Image-Based Auto-Trigger, optional On-Camera Controls, and a CineMag interface, and you have the ideal camera for range applications. Its small size and light weight also makes it ideal for tracking mount applications.

What's in the Box...

  • Power supply
  • Ethernet cable
  • Capture cable
  • Phantom PCC software
  • Getting Started Guide



Common resolutions and frame-rates, other resolutions available

Short Description
  • The Phantom v341 provides a 4 megapixel sensor with almost 3 gigapixel/second throughput. That means full-resolution frame rates of 800 frames-per-second (fps), and a maximum of 130,000 fps at reduced resolution.
  • Almost 3 Gpx/second
  • Max speed at full resolution of 2560 x 1600 is 800 fps to RAM and 195 fps to CineMag
  • Max speed at reduced resolution of 256 x 8 is 130,000 fps to RAM
  • Min frame rate of 10 fps
Sensor Specifications
  • CMOS sensor
  • 2560 x 1600 pixels
  • 10 µm pixel size
  • 25.6 mm x 16.0 mm
  • 12-bit depth
  • ISO Monochrome 6,400 D
  • ISO Color 1,600 D
  • TE cooled
  • CAR in 256 x 8 increments
  • Fill factor: 70%
  • Dynamic range: 54.6 dB
  • Read out noise at 20.6°C (typical): 21e-
  • Full well capacity (typical): 11000e-
  • 1 us minimum exposure
  • Global electronic shutter
  • Extreme Dynamic Range (EDR)
  • Auto Exposure
  • Shutter Off mode for PIV
  • 8 GB, 16 GB and 32 GB high-speed internal RAM
  • CineMag compatible (128 GB, 256 GB, 144 GB, 512 GB)
Record Times
  • 7.4 seconds at maximum frame rate, maximum bit depth, largest resolution and into maximum internal memory
Special Features
  • Segment memory for up to 63 cines in multi-cine mode
  • Continuous recording
  • Frame rate profile
  • Memory gate
  • Event marking
  • Frame timestamp (IRIG or SMPTE)
  • IRIG in/out (modulated and unmodulated)
  • Shutter off mode for PIV exposure
  • 1.4 µs straddle time
  • Burst mode
  • Standard internal mechanical shutter for automatic/remote Current Session Reference (CSR)
  • Standard Image-Based Auto-Trigger (IBAT)
  • Two 12 VDC, 1.5 A auxiliary power ports
  • Secondary IP address
  • Field-based firmware upgrade capable
  • Programmable trigger location (pre/post trigger recording)
  • Image-Based Auto-Trigger optional
  • Trigger from software
  • Hardware trigger BNC
Timing & Synchronization
  • 20 ns timing resolution
  • Frame synchronization to internal or external clock (FSYNC)
  • IRIG in/out (modulated or unmodulated)
  • SMPTE timecode at support frame rates
  • Ready output
  • Strobe output
  • Genlock
  • Dedicated FSYNC, Trigger, Timecode In and Timecode Out (SMPTE & IRIG) BNCs on camera body
  • Range Data input on camera body (Fischer)
  • Capture cable with Ready, Strobe, IBAT-Trigger, Pre-Trigger, Analog Video
  • Additional signals, including Genlock, available with use of optional Break-Out-Box (BoB) Note: cannot use serial port on BoB and serial port on the camera at the same time. Powering the camera through the BoB using the standard AC power supply requires an adapter cable.
Ethernet Connection
  • Gb Ethernet for both control and data
  • 10 Gb Ethernet via CineStream X2SR
Camera Control
  • Optional On-Camera Controls (OCC)
  • Phantom Camera Control (PCC)
  • Remote Control Unit (RCU), connects to Remote port
  • SDK available
Video Out
  • Analog video (NTSC or PAL) available on Capture Cable
  • Two identical 4:2:2 HD-SDI ports on camera
  • Component viewfinder port
  • Nikon F-mount standard, supports F & G style lenses
  • Canon EOS mount optional
  • PL-mount optional
  • C-mount optional
  • (lens not included)
Video Processing
  • Brightness
  • Gain
  • Gamma
  • Saturation
  • Hue
  • White Balance
  • Color interpolation algorith
  • Filters
  • Color matrix
  • Image flip and rotate
  • Crop
  • Scale
Data Acquisition
  • National Instruments M- and X-Series DAQ modules with integrated support in PCC
Motion Analysis
  • Basic measurements via Phantom Application:
  • Distance
  • Speed
  • Acceleration
  • Angles and Angular Speed
  • Manual and Automatic point collection for target tracking
  • Compatible with 3rd party solutions
Supported File Formats
  • Cine, Cine Compressed, Cine RAW, AVI, h.264 mp4, Apple ProRes .mov, Multipage TIFF, MXF PAL, MXF NTSC, Uncompressed QuickTime, Windows BMP, OS/2 BMP, PCX, TGA, TIFF, LEAD, JPEG, JTIF, RAW, DNG, DPX
  • 100 - 240 VAC, 220 Watt power supply included
  • There are two DC inputs on the camera back panel for hot-swapping power or providing battery backup when using AC power
Mechanical Specifications
  • Size (without lens, CineMag or handle): 11.5 x 5.5 x 5.0 inches (L x W x H); 29.2 x 14 x 12.7 cm
  • Weight (without lens or CineMag): 11.75 lb; 5.33 kg
Environmental Specifications
  • Temperature and Humidity: 0°C - 40°C @ 8% to 80% RH
  • Shock: 30G, half sine wave, 11 ms, 10 times all axes (without CineMag or lens)
  • Vibration: 0.25G, 5-500 Hz, all axes without CineMag
  • Phantom SDK
  • LabView
  • MatLab
Ships Standard With
  • Power supply
  • Ethernet cable
  • Capture cable
  • Phantom PCC software
  • Getting Started Guide
  • Image-Based Auto-Trigger
  • Internal Mechanical Shutter
  • CineMag interface
  • Canon EOS lens mount
  • PL-mount
  • On-camera controls
Popular Accessories
  • CineMag
  • CineStation
  • RCU
  • CineStream
  • Break-out-Box (IRIG-in, IRIG-out, NTSC/PAL Video, Trigger, Event, Strobe, A-Sync, Pre-Trigger/Memgate, Ready, GenLock)
© Copyright 1999-2015 Vision Research Inc., All Rights Reserved Terms Of Use | Privacy Statement
100 Dey Rd. Wayne, NJ 07470, USA  | Tel: +1 973.696.4500 | Toll Free: 1.866.450.7426